Відео

MINE FALL APART WHEN I TRY TO MOVE THEM.... HOW DO I PIN THEM TOGETHER SO THAT THEY DONT FALL APART??? I HAVE OVER 2 DOZEN OF THESE NIGHTMARES AN NEED SOME ANSWERS...

Do these stack like their regular draws ?

IM REALLY ANGRY !!. I bought eight of Sterilite 1990980 116-Quart Ultra Storage Box, 4-Pack, See-Through with White Lid and Titanium Latches. But two of them had clear lids which shattered to pieces. Watch out for the ones with the clear lids. The other six of my purchase had white lids which don’t shatter and break.

I'm wondering how to use these drawers. The ones I have are not even tall enough to store nail polish standing up. This means a lot of the plans I had for them will not work. My crafting supplies need more room than the hight of my drawers. 🤔

I can’t figure out how to take the top off mine!!!

We bought 24 of these bins for our garage. Every single one of them have had the handles fall off, break off. We use them once put them aside, a couple months later we go to open them, and the handles are so brittle, they just fall apart. These things are garbage, and you can’t return them.

Price po

My top does not open. ANY SUGGESTIONS? It will not spring open anymore.

Horrible product. Mine collapse from the top center. I regret buying these.

Hope this off-white version comes back into production. I only find the grey version. Thanks!

You've got to do something about reinforcing several areas of this great cart. The top shelf starts to cave in due to top shelf use. Then the top drawer gets stuck both pushing in and pulling out. The other issue, and this applies to almost all other WHEELED carts is that the insertion tube section underneath where you push in the wheels to attach, I don't know how better to describe that part, needs to be REINFORCED either by thicker guage plastic in that fitting. The wheels tend to finally buckle from that insertion part simply prematurely breaking. Then when you try to glue it, no matter how great a glue, falls apart. Other than that, these carts have always been great, I hope to see 5 drawer version with smaller drawers at the top.

View part number 2910N3_C

Does anyone know if these stack on the 40 gallon rolling totes?

I HATE this video too much glare and the carts suck.

I don't like these drawers or videos, poor directions/NO DIRECTIONS.

what is the gasket made of

I have bought over 50 of these in different sizes, I would like to buy more but I can't find them in clear anymore.

how to remove the caps on the wheels?

If the lord da also have handles on top for easy carriage and transport Thank you Merry Christmas happy new year

Help me take it apart

Great for using them as fish tanks.

This is heartening when I have about 26 10 gal ones that stack on each other and cannot find more anywhere. Nearby me in 92025 zip code of ca. H E L P!!! ………… H E L P …….

Really like these but the latches tend to fall off in transit. How do I reattach them without breaking them?

That looks easy to set up! Thanks everyone! 😊🌎♥️

Best thing about these Made in the U.S.A.🇺🇸

How do I take apart the actual tower. I inadvertently put 4 together and it needs to be a 3 drawer tower.

Having trouble removing the top off the units. They've warped over time and would like to fix them. How do I remove the tops? Thanks

These look very nice, I'll have to pick up some for garage storage.

They should sell the tote and tops separately, that way you can order one tote and two tops. The tops are the first thing to go and makes tote worthless!

Good to sit on?

Thank you much for sharing ..your video was so helpful and quick results👍

What size lock will fit

How does one install the retractable handle. There is no instructions.

I have 12 of the size being shown here today in one tower stack. It's on an end table that used to be my printer stand. I had my husband cut it down to a bit smaller square but about 26" give or take high top. It's now in a tight corner & I stacked 12 high or four sets of these drawers. I actually have 3 more but was getting too high for me see into the top drawer. NOW mind you mine are light grey with dark handles they show here darker grey with light handles? I think Sterilite NEEDS to stay with it's color pallet for more years than sometimes some bean counter decides to dismiss and change up. NO NO NO. Pros to this stack is they hold pretty much a full ream of standard paper or 8.5" x 11" paper and cardstock. It's a life saver. I keep 3 drawers 3,4,&5 from bottom up empty or kinda empty where I can quickly stash new items or currant projects in to keep area clean and neat and our kits from getting into stuff. So the light grey looks great. I also have the same gray in the 3 high deeper units and same size in the 2 deep drawers but two half drawer towers in what they call I think small. Originally they came with wheels. Now they don't. My last purchase looked like a match at the Target I bought many of the originals at but it wasn't a match when I got home. It was a more putty color and ouch. Also the last 3 I bought the deep drawers all bow so bad they are hard to pull in and out and it's a battle. In the end I put those upstairs in attic because we tried to get the bow out of them leaving outdoors in sun with cement blocks on the bottom of the drawers turned upside down and not even after days did it help. So quality control is a bit problem these days. I also have 54 drawers of the Large Desk drawers in clear translucent that I stack in towers 10 and 16 high and in the process of making those 11 and 19 high. Those hold pads of paper 12"x12" so how great is that? RIGHT I Know. I spent most of my stimulus money on sterlite products mainly drawers and my new and ever growing hobby of die cutting and paper crafting. Need place for tools and dies and envelopes that store dies and magnetic sheets to go in envelopes that store dies and ink pads and inks and on it goes. Now the down side...54 drawers plus 12 plus 6 extra deep drawers stacked two high under a credenza work table & WHERE DID I PUT IT. Right now need to label these drawers. WHICH brings me to one of my number one fan of almost all sterilte drawers I've bought over the past 20 years and they come out with a little squeeze towards the back of each side of the drawer at the same time then they slip right out. I can actually change drawers around to stay ahead of organizing and reorganizing so I no longer or rarely need to remove everything from two drawers to rearrange the drawers slip out. Not so with a 10 high stack of Tonic large drawers that are not big enough for a standard size sheet of paper by about 1/4 " all around. WHAT person didn't think about that when developing a craft drawer for paper crafters. So Sterilite is my go to drawer fan despite the hiccups I've come across. No it's not FURNITURE in the sense of high end wood pieces it's not meant to be. It's utilitarian useful storage to help keep up with clutter for hobbies and household STUFF. Deep drawers are great for kids. And yes I prefer them with wheels so I can move and clean under the towers I make. We have hardwood floors on our 3 story home and cement and wood in basement. Wheels are ideal. However I did save all the wheels off ones that fit on shelves and stack towers out of the deep ones so often 5-7 high and that means for every three that came with wheels I had extras in the end which I've now used up and bought more hoping they would fit but they don't. Still I am a fan. They should hire me as a designer. By the way SHOP around as in Google or DuckDuck before you buy and check with the stores if you have them before buyiing on line as some sellers are marking up Sterilite products 2 even 4 fold. Some of the best deals are multiples so if you have friends who would like something too that matches your taste you could go together to save shipping and per item price. These desk drawers to date have not bowed on me.

Can the lid still be removed even if it's hinged? Or is it stuck there snd will break if I try to remove it?

Very nice

found out what it was after yall deleted my comment...its the EZ Carry Small Oval Show Off storage container w/hindge & latch lid...& they r all out of stock...y...cuz they wrk good....bring those bak instead of these cheap containers yall r pushing off on this vid...lmao...do yalls job right & stop make more cheap containers...

Can these be stacked? And if so, is there a specific way to do it?

Are these stackable? If so, is there a specific way to do it?

We just purchased one of these and dont know if this one showed in the video is a different model than the one we have only becasue, in the video above, its showing that Panel B the lower back panel actually has 3 holes on each side of it, Ours onlyn have 2 holes, 2 on the top, and 2 on the very bottom of the panel, dont know if that means anything or not....

Bottom half of the cabinet went well when I try to get the side panels at the top on the Plastics do not match up they are warped I have been fiddling with this thing for hours it is making me so mad if one and goes in the other one won't go in and snap into place it is so difficult I'm going to have to call my son to come over and push the size down and the grooves won't even lineup disgusted

uh, I wouldn't describe the plastic as "crystal clear"though you can see through them a bit. LMAO

Is it dishwasher safe?

Can these stack inside of one another when empty?

I have two of these and would like to purchase another to divide and make 2 6-drawer units. Is that a reasonable thought?

I use these for housing my breeder corns as well as miscellaneous hots/random odds and ends and cannot recommend them enough as an efficient solution for housing a large quantity of reptiles in a restricted amount of space.

8kica vun.fyi

the castors do not go in easily, like she did in video. There is a stop half way in and castor will go no further. ? I press down hard, would not penetrate the plastic stop!

Is it available with wheels like the clear 3 drawer wide?

I have one of these units. Do you make some sort of insert I can put in the hollow uprights to reduce the sideways play when openin/closing the drawers, to to lift the top so it doesn't bow? I considered cutting some oblong dowels, but there is no "lip" on the bottom on the post to stop a dowel from going all the way to the floor, which would cause problems when trying to roll the cart.